If you have decided to join in the bandwagon and purchased a 3D printer, you’re in for a lot of exploration and adventure. To the new owner of a 3D printer, you are just starting your journey to the new world of learning. There are lots of lessons and skills that you need to learn about. In addition to that, you can also be able to create a wide array of new things.
If you wish to jumpstart your new 3D printing adventure the right way, then there are some tips and tricks that you need to know.
- Avoid using printer on unleveled platforms.
When you use the printer on unleveled platforms, there will be lots of problems that you will encounter during printing. If you wish to avoid such problems, it is a must that you monitor the platforms that you have. One way to easily determine this is by doing the paper test. This can be done by making use of a sheet of paper to determine the height of the extruder nozzle when placed on the platform.
- Regularly clean the build platform.
Maintenance of the printer is a necessity but maintenance of the platform is important as well. This is why you must make it a point to clean the build platform on a regular basis with the use of an alcohol. This is because the oil that will come from your hands will prevent the object that you wish to print into from sticking to the build platform.
- Keep special precautions in mind when printing on different types of materials.
One common material that 3d printing can print on is the ABS plastic. If this is the material that you will be printing to, it is a must that you make sure that the build platform is preheated on its maximum temperature. When you carry this out, you will be preventing the edge of the plastic from curling. Another thing to keep in mind is the fact that the platform should be covered if you are printing in LPA on an unheated build platform. You can make use of a blue painter’s tape to get this done.
- Determine what type of plastic you are printing on.
These days, the most popular types of plastic that people print on are the ABS and PLA. Keep in mind that these two types have their own characteristics, such as extruding speed and melting point. Because of this, you must make sure that the printer’s profile will match the type of plastic you will be using.
With these tips, you can make use of your 3D printers for many years to come without encountering any problems. When the 3D printers are used the right way, it will be functional for a very long time. Plus, you can also get to make the most out of your 3d printer. Proper maintenance of the equipment plus choosing the right techniques in printing will ensure that your printer will last its lifetime.
This article is written by Sarah del Rosario of Uktonercartridges.co.uk. Sarah is a full time blogger and a 24/7 mom of an 8 month old bubbly boy.